Authorised Distributors of :
Cable Glands & Lugs
An ISO 9001 : 2008 COMPANY
 
 
 
 

Utility Channel Support System
 
Strong, Fast, Economical and Adjustable
 
Channel Support System
Insert the spring nut anywhere along the continuous
slotted channel. The rounded nut ends permit easy
insertion.
  
Strong Channel Support System
A 90° clockwise turn aligns the grooves in the nut with the inturn edges of the channel. Fitting can be placed anywhere along the channel opening, permitting complete freedom of adjustment.
The need for drilling holes is eliminated.
         
Channel Support System
Insert the bolt through the fitting and into
the spring nut. See illustration 5 for end
view showing the nut in place)
  
Cable Tray Supports
Additional channel sections can now
be bolted to the fitting already in place
by following procedure described in
steps 1-3.
         
Cable Tray Supports
Tightening with a wrench locks the
serrated teeth of the nut into the iturned
edges of the channel, to complete a
strong, vise-like connection.
  
Utility Channel Support System
ELCON SUPPORT SYSTEM is designed with many time saving features. Fully
adjustable & reusable, with a complete line of channels, fittings & accessories for Multipurpose applications.

• NO WELDING
• NO DRILLING
Are the basic fundamentals of installing this system.
 
Applications
 
ELCON Support System can be used for :
 
ELECTRICAL & INSTRUMENTATION APPLICATIONS
a. Flexible Cable Tray Support Systems
b. Lighting Fixture Supports
c. Instrument Mounting Plates
d. Conduit Supports etc…		 MECHANICAL APPLICATIONS
a. Piping Rack
b. Concrete Inserts
c. Beam Attachments
d. A/c Duct Supports etc…
 
 
Cable Tray Supports
Cable Tray Supports
Cable Tray Supports
 
 
Channel Code
Height
Width
Thickness
A-A 82
82.5
41.3
2.5
A-A 61
61.9
41.3
2.5
A-A 41
41.3
41.3
2.5
A-B 41
41.3
41.3
2.0
A-C 41
41.3
41.3
2.0
A-C 41
41.3
41.3
1.5
A-B 21
21.3
41.3
2.5
A-B 21
21.3
41.3
2.0
A-C 21
21.3
41.3
1.5
Combinations
 
 
 
Standard Applicable
Materials :
Hot Rolled Steel as per IS 1079, ASTM A621, BS1449 HR2, JIS G 3131 SPHD
Cold Rolled - Steel as per IS 513, ASTM A336, BS 1449CR, JIS G3141
Structural Steel - ( for fittings & brackets ) IS 2062, ASTM A570, BS 4360, JIS G 3101

Hot Dip Galvanized :
As per IS 2629, ASTMA123, BS 729, JIS H 8641
Hot Rolled
 
 
 
Concrete Inserts :

Continuous Slot Concrete Inser are designed to provide a pre-set support system, cast in concrete ceilings, walls & floor to allow flexibility of attachments at any point along the channels. This provides as excellent support for pipe, conduit, cable trays etc.

Continuous Concrete Inser are manufactured from Am-Strut's standard Channel. Anchor Spacing is 200 mm C/C.
We also provide special PVC end caps, to avoid concrete insertion into the channels at the time of concreting.

Support Pipe
   
 
 
 
 
Accessories Required

ELCON offers a comprehensive range of fittings & accessories to complete the total support system. Generally, fittings are manufactured from 6mm Mild Steel, however can be offered in different dimensions as well as thicknesses depending on applications.

Normal finish of all brackets and fittings is HOT DIP GALVANIZED.

All holes for all the fittings are a standard size of 14 mm, made of M12 Hex Bolts.
Support System Accessories
   
 
 
   
 
Home | Profile | Cable Tray | Clients
Quality Policy | Certificate | Gallery | Approved by | Contact Us | Feedback | Sitemap